Bajaj Pulsar 200 Dtsi Service Manual ❲360p❳

: Clean and lubricate the chain every 500–600 km , especially after rain or dusty rides, ensuring a slack of 20–30 mm.

: Four-stroke, single-cylinder, natural air-cooled DTS-i engine with a displacement of 198.8 cc .

: Maintain a front pressure of 28 PSI and a rear pressure of 28 PSI (solo) or 32 PSI (pillion) to ensure grip and fuel efficiency. Bajaj Pulsar 200 Dtsi Service Manual

: Uses unleaded petrol with a carburetor-based fuel system (often UCAL-MIKUNI BS29).

: Equipped with a 5-speed constant mesh gearbox and a wet, multidisc-type clutch. : Clean and lubricate the chain every 500–600

: The vehicle has a wheelbase of 1350 mm and a minimum ground clearance of 165 mm . Periodic Maintenance Schedule

Regular servicing is typically recommended at specific kilometer or time intervals to maintain optimal efficiency. Service Number Distance Interval 500 – 750 km Replace engine oil, oil filter, and clean oil strainer. 2nd Service 4,500 – 5,000 km Top up engine oil and clean air filter. 3rd Service 9,500 – 10,000 km Full engine oil replacement and spark plug inspection. Subsequent Every 5,000 km Periodic checks of brakes, chain, and electrical systems. Key Maintenance Tips : Uses unleaded petrol with a carburetor-based fuel

: Delivers a maximum net power of 18.0 PS (13.25 kW) at 8000 rpm and a maximum torque of 17.17 Nm .