A_feladat_1_start.pkt Apr 2026

: On switches, configure interface vlan 1 with an IP address and no shutdown . 3. Routing and Connectivity

Refer to the "Addressing Table" provided within the lab instructions to assign addresses.

A detailed write-up for this type of Packet Tracer lab generally follows these steps: 1. Basic Device Configuration A_feladat_1_start.pkt

: Disable DNS lookup ( no ip domain-lookup ) and encrypt plain-text passwords ( service password-encryption ).

: On routers, enter interface configuration mode (e.g., interface g0/0 ), set the address ( ip address [IP] [Mask] ), and enable it with no shutdown . : On switches, configure interface vlan 1 with

: Often configured on edge routers using ip route 0.0.0.0 0.0.0.0 [Next-Hop/Exit-Interface] .

Console password: line con 0 , then password cisco and login . VTY lines: line vty 0 4 , then password cisco and login . A detailed write-up for this type of Packet

Every router and switch in the topology typically requires these initial settings: